If you have
objectionable movement and sliding up on the
propeller in high winds this is the fix.
2 coats of common rubber cement about 2 inch around the inner edge of the PropPastie where it
contacts the blade will provide a high friction surface that will minimize this sliding in high winds.
I find 10 minutes between coats with 1 hr. drying time works well .
2 coats of common rubber cement about 2 inch around the inner edge of the PropPastie where it
contacts the blade will provide a high friction surface that will minimize this sliding in high winds.
I find 10 minutes between coats with 1 hr. drying time works well .
The reason for this fix is that the high quality material used in production was different than the
unknown material used in the prototype. This was not an objectionable problem in prototype testing.
PropPastie will fix and return your item should you wish.
The first class postage is at the 2oz rate for just the PropPastie.
E-Mail to:
Don@PropPastie.com
I will send my address and confirm your address.